Our home is a little over a year old, but there are so many things I want to do to it. The builder gave us a handful of lighting packages to choose from. This means I got to pick my favorite out of packages that I didn’t really like too much. We couldn’t modify anything, bring in our own lights, and for the first year of homeownership, we had to use their electrician for any work we wanted done. I was anxiously waiting for the one-year warranty to be up so that I could make some changes. One of the changes that I waited to do was the lighting in our primary bathroom. The vanity lights will be different someday, but for now, I learned how to convert a can light to a pendant light and these pendants add so much character. The brass accents on the pendants also visual warmth to the space and the bulbs create a nice mood lighting too.

This post will not explain the technical steps I took to convert a can light to a pendant light (liability and stuff). But I will tell you what I used and share my tips. If electrical work scares you or you are hesitant to DIY a lighting project, be sure to contact an electrician. It’s not worth the risk. When I tackled this DIY lighting conversion, I triple checked to make sure the electricity was off, I reread the instructions multiple times (to make sure I understood and because they weren’t very well written~). I felt comfortable attempting this project and had my husband double check my work. Doing electrical work, yourself can lead to house fires and even electrocution, be careful and consider your risks before attempting any home DIY.

How to Convert a Can Light to a Pendant Light

After I selected the pendant lights that would replace the two can lights, I made note of the diameter of the base. I needed to know if the new pendant base would cover the hole in the ceiling left by the can light. Unless you’re replacing a can light with a large flush mount light, it’s fairly likely that you’ll need a goof ring to go between the new light and the ceiling. These can be painted to match your ceiling and I barely notice ours. However, this look isn’t for everyone in which case you’ll need a drywall dude to come and make some repairs which will cost more than the goof ring, but it may be worth it to you. You will also want to take note of what bulb wattage the new lighting takes. If you need bright light, make sure your fixtures can take high wattage bulbs.

I purchased a two pack of converters because I had two can lights to convert and it was cheaper, but you can get just one or larger packs too. I unboxed the kit and studied the directions and got a good understanding of what I’d be doing with all the parts and the order to do them in. I read the instructions so many times my eyes felt like crossing, but it’s better to be confident than confused. So, once you have the new light fixture, the goof ring, and the converter kit, you’re ready to make the change.

In addition to double checking to see if the electricity was on, I used a non contact voltage detector. It’s better to be safe than sorry and it gave me peace of mind to know I made the checks before touching electrical wires. I created a video (below) showing how to convert a can light to a pendant light, but it’s mainly to show the process and steps. Everyone’s home has a positive and a negative electrical wire for the lighting but depending on the age of your home and building codes, wire colors may differ from mine and construction is sometimes just strange. If you watch the video, don’t use it as a tutorial, but as a general guide to show you the basic steps taken and how easy it is to convert your lighting.

How to Convert a Can Light to a Pendant Light

Here are the items I used to convert a can light to a pendant light:

• Non-contact voltage detector
• Custom goof ring – white plastic
• Recessed light converter – 2 pack
• Acanthus leaf dome pendant light

This post may contain affiliate links. This means I may receive a small commission from each purchase, at no cost to you. As an Amazon Associate, I may also earn from qualifying purchases. Thank you for using my links to help keep this blog going!

How to Convert a Can Light to a Pendant Light

I found a site that offers custom goof rings. You can determine the inner and outer diameter so that you can cover any sized hole once the can light is removed. Some goof rings can be painted or found in other finishes like bronze, brass, black, etc. With the addition of pendant lights in our primary bathroom, my next project is updating the vanity lights, mirrors, and adding a decorative touch. Step by step our bathroom is coming together. Here are some progress shots of the space but be sure to subscribe to get updates when more is completed.

Changing out the two can lights with brass and glass pendants has transformed this primary bathroom. I’ll be the first to admit that I’m usually very impatient, but when designing a space, I also enjoy the process and the feeling of getting each part just the way I want it. Lighting is such an important design element; it has the potential to totally update and change an entire space. I hope this post has inspired you to consider lighting in your design plans and to look at your recessed can lights in a new way. Be sure to subscribe to receive DIY and decorating inspiration once a week.